Polestar EV & PHEV

Polestar EV charger installation — Polestar 2, 3 and 4

Polestar has carved out a steady niche in Australia with the Polestar 2 (Volvo-related, made in China) plus the newer 3 and 4. All current Polestars accept 11kW three phase onboard — three phase is genuinely worth it if your home supports it.

Call 0413 635 112 Get a quote

★★★★★ Google rated • Licensed VIC & NSW • Same-day quotes

★★★★★ 5-star Google rated

Same-day quotes across Mildura

5-year warranty on workmanship

Licensed VIC & NSW REC + NECA + insurance

Sister of NextES Full electrical depth

Polestar models we install chargers for

Polestar onboard AC charging:

Model	Type	Onboard AC	Recommended charger
Polestar 2 (Standard, Long Range, Dual Motor)	BEV	11kW three phase	Ocular LTE Plus 22kW (our pick) — or Zappi V2 / Tesla Wall Connector three phase
Polestar 3	BEV	11kW three phase	Ocular LTE Plus three phase (our pick) — or Zappi V2 / Wallbox three phase
Polestar 4	BEV	11kW three phase	Ocular LTE Plus three phase (our pick) — or Zappi V2 / Wallbox three phase

Install notes for Polestar owners

→Polestar app handles vehicle-side controls. Charger app handles charger-side (Zappi, Tesla Wall Connector, Wallbox).
→Charge port is on the front-left of Polestar 2, rear-left of Polestar 3/4 — affects ideal mounting position relative to your parking pattern.
→Polestar 2 ships with a Mode 2 portable charger — useful as a backup but a 7-11kW wall unit is faster and safer for daily use.

Chargers we recommend for Polestar

Ocular LTE Plus 22kW three phase (our pick for Polestar)Zappi V2 22kWTesla Wall Connector Gen 3Wallbox Pulsar Plus three phase

How it works

Get a quote

Call us or send a quick form. We'll do a phone or on-site assessment and send a fixed quote within a day.

Site visit

We check your switchboard, supply, and where you want the charger mounted. Quote is locked in.

Install

A clean install — usually 3-4 hours, longer if a switchboard upgrade is part of it. We tidy as we go.

Demo & sign-off

Walk-through of how to use it, app set-up, certificate of compliance issued.

Frequently asked questions

How much does a home EV charger cost to install in Mildura?+

A standard 7kW single-phase home EV charger installed at a typical Mildura home runs from around $1,500 to $2,500 all-in (charger + install + certification), depending on the brand of charger you choose and the length of the cable run from your switchboard to the install point. Three-phase 22kW installs and jobs that need a switchboard upgrade cost more. We give you a fixed quote after a site visit so there are no surprises.

Do I need a single phase or three phase EV charger?+

About 90% of Australian homes are single phase, and most current EVs accept a maximum of 7-11kW onboard charging anyway, which a single phase 7kW charger handles fine. Three phase 22kW is worth it only if (a) your home is already on three phase and (b) your EV accepts 11kW or 22kW onboard. If you're not sure what your EV accepts, we'll check the spec for you before we quote — no point paying for capacity you can't use.

How long does it take to install an EV charger?+

Most home EV chargers we install in Mildura take 3-4 hours on site, from arrival to walk-through. If a switchboard upgrade is needed it adds another half day. From the time you call us to the day the charger's on the wall is usually 1-2 weeks.

Get a quote — Polestar

Tell us what you need. We'll come back within one business day with a quote or a few questions.