MG EV & PHEV

MG EV charger installation — MG4, ZS EV, MGS5 EV and HS PHEV

MG has been one of the most affordable EV options in Australia for a few years now, and the MG4 in particular has been a big seller across Mildura and the Sunraysia. Most MG EVs accept 7kW or 11kW onboard — a standard single-phase 7kW wall charger is the right call for most homes.

Call 0413 635 112 Get a quote

★★★★★ Google rated • Licensed VIC & NSW • Same-day quotes

★★★★★ 5-star Google rated

Same-day quotes across Mildura

5-year warranty on workmanship

Licensed VIC & NSW REC + NECA + insurance

Sister of NextES Full electrical depth

MG models we install chargers for

MG onboard AC charging:

Model	Type	Onboard AC	Recommended charger
MG MG4 (51, 64, 77 kWh, XPower)	BEV	6.6kW or 11kW (model dependent)	Ocular LTE (our pick) — or Zappi V2 / Wallbox Pulsar Plus
MG ZS EV (current)	BEV	7kW single phase or 11kW three phase	Ocular LTE 7kW (our pick) — or Zappi V2 7kW
MGS5 EV (2024+)	BEV	11kW three phase / 7kW single phase	Ocular LTE Plus (our pick) — or Zappi V2 / Wallbox
MG HS PHEV	PHEV	6.6kW single phase	Ocular LTE 7kW (our pick) — standard single phase wall charger
MG Cyberster	BEV	11kW three phase	Ocular LTE Plus three phase (our pick) — or Zappi V2 / Wallbox three phase

Install notes for MG owners

→Check your MG variant carefully — onboard charger varies between 6.6kW and 11kW even within the same model line.
→MG iSmart app handles car settings; charger control via dedicated charger app (Zappi, myenergi, Wallbox).
→MG4 XPower has higher onboard than base trim — 11kW vs 6.6kW — relevant if you have three phase supply.

Chargers we recommend for MG

Ocular LTE / LTE Plus (our pick for MG)Zappi V2 (solar-aware alternative)Wallbox Pulsar Plus

How it works

Get a quote

Call us or send a quick form. We'll do a phone or on-site assessment and send a fixed quote within a day.

Site visit

We check your switchboard, supply, and where you want the charger mounted. Quote is locked in.

Install

A clean install — usually 3-4 hours, longer if a switchboard upgrade is part of it. We tidy as we go.

Demo & sign-off

Walk-through of how to use it, app set-up, certificate of compliance issued.

Frequently asked questions

How much does a home EV charger cost to install in Mildura?+

A standard 7kW single-phase home EV charger installed at a typical Mildura home runs from around $1,500 to $2,500 all-in (charger + install + certification), depending on the brand of charger you choose and the length of the cable run from your switchboard to the install point. Three-phase 22kW installs and jobs that need a switchboard upgrade cost more. We give you a fixed quote after a site visit so there are no surprises.

Do I need a single phase or three phase EV charger?+

About 90% of Australian homes are single phase, and most current EVs accept a maximum of 7-11kW onboard charging anyway, which a single phase 7kW charger handles fine. Three phase 22kW is worth it only if (a) your home is already on three phase and (b) your EV accepts 11kW or 22kW onboard. If you're not sure what your EV accepts, we'll check the spec for you before we quote — no point paying for capacity you can't use.

How long does it take to install an EV charger?+

Most home EV chargers we install in Mildura take 3-4 hours on site, from arrival to walk-through. If a switchboard upgrade is needed it adds another half day. From the time you call us to the day the charger's on the wall is usually 1-2 weeks.

Get a quote — MG

Tell us what you need. We'll come back within one business day with a quote or a few questions.